How-To's

Boot With USB Drive Using Rufus and UNebootin

46630_02_windows-10-spotted-usb-flash-drive-super-easy-installation_full

When USB drives came to market, it was said that it will replace CD because there were lots of advantages of USB drives on CDs. They need lesser space to carry; you can delete data from it and store a new one, and they have faster reading and writing speed. This one thing still beats USB drives that you can install Windows OS and Linux OS only using a CD. But now things have changed, you can now install any OS from the USB drive by making your flash drive Bootable.

There are lots of freeware on the internet which can make your drive bootable and then you can boot any OS from it (except Mac OS).

Prerequisite:

  • A USB drive with at least 4 GB space (8 GB recommended).
  • OS image file (ISO file).

Rufus (Free | Windows):
3

Rufus is a freeware with which you can create a bootable drive of almost all OS available. Rufus is available in two versions portable and installer. The portable version is a standalone executable file which you can launch from anywhere it is saved on your PC, and the installer version will get installed on your PC, this is no performance difference between them. Below are the steps to create a bootable USB drive using Rufus.

  1. Launch Rufus on your PC.
  2. Select your USB drive under “Device” section.
  3. Click on the CD drive icon under the “Format option” and select the ISO file.
  4. Finally, click on “Start” button.
  5. Rufus will start copying the files from the ISO file (this will format the drive and all data on the drive will be erased).
  6. After some time, Rufus will notify you about the completion of the process.

Download Rufus (868KB)

UNebootin (Free | Windows, Linux, Mac):

UNebootin is the best freeware for making the bootable drive for Linux. UNebootin is also a standalone tool, but the best part of the UNebootin is that you don’t need to download the image files separately, UNebootin is built with the feature to directly download the OS and make your drive bootable. UNebootin creates live USB so you can try the OS without actually installing it on your PC, this feature is restricted to Linux-based OS only like Android, BackTrack, Kali Linux and more. To make your drive bootable using UNebootin just follow the steps below:

  1. Download the UNebootin.
  2. Launch it on your PC.
    1
  3. Select the distribution from the “Distribution” section or if you have image file then select that image file under the “DiskImage” section.
  4. Select your USB drive and click OK.
  5. UNebootin will begin the process and prompt you whether to reboot your PC.2

UNebootin is for those who wants to install any Linux version without even downloading the ISO from official websites separately.

Download UNebootin (4.6 MB)

Install OS from bootable USB drive:

  1. Plug in your USB drive and reboot your PC.
  2. When your PC is booting up, press the key to access the boot menu (usually it is F12, but it varies with the manufacturer).
  3. When in boot menu select your drive and press enter to boot it up.
  4. Now follow the instructions to install the OS on your PC.

On Mac:

  1. Plug in the USB drive to mac.
  2. While your Mac is booting up keep pressing the Alt key.
  3. You will see the bootable disk, select the drive to boot from that flash drive.

To make your drive usable again, just format your drive with NTFS file system.

These were the only USB bootable software I use and also recommend these to you all. Although there are lots of USB bootable making software available these are the easiest of them all, and also faster.

Click to comment

Leave a Reply

Your email address will not be published. Required fields are marked *

Most Popular

Quis autem vel eum iure reprehenderit qui in ea voluptate velit esse quam nihil molestiae consequatur, vel illum qui dolorem?

Temporibus autem quibusdam et aut officiis debitis aut rerum necessitatibus saepe eveniet.

Copyright © 2015 The Mag Theme. Theme by MVP Themes, powered by Wordpress.

To Top